[RS2V] Colt XM16E1 1.0
![[INS2] Panzerfaust 3](https://img.gta5-mods.com/q75-w500-h333-cfill/images/ins2-panzerfaust-3/6b1705-0.jpg "[INS2] Panzerfaust 3")
2 034
22
2 034
22
Full credit goes to Katka for the original mod on steam. I simply ported this mod to GTA V. This model is from Rising Storm 2: Vietnam, I take no credit for creating the model or textures.
DO NOT REPOST ANYWHERE WITHOUT MY PERMISSION
Description:
The U.S. Army XM16E1 was essentially the same weapon as the M16 with the addition of a forward assist and corresponding notches in the bolt carrier. The M16A1 was the finalized production model in 1967 and was produced until 1982.
To address issues raised by the XM16E1's testing cycle, a closed, birdcage symmetric flash suppressor with open side slots to the top, bottom, left and right replaced the XM16E1's three-pronged flash suppressor which caught on twigs and leaves from 1967 onwards. Various other changes were made after numerous problems in the field. Cleaning kits were developed and issued while barrels with chrome-plated chambers and later fully lined bores were introduced. A small storage compartment inside the stock was introduced. The buttstock storage compartment is often used for storing a basic cleaning kit.
Replaces the Carbine Rifle.
Features:
Fully animated
Working collision data
Attachment compatible
2K textures
Comes with 20 round mag and 30 round mag.
Please note:
The iron sights line up perfectly but scopes are not usable.
Animations work flawlessly.
Installation:
Just extract the archive and place the files in
mods/update/x64/dlcpacks/patchday8ng/dlc.rpf/x64/models/cdimages/weapons.rpf
DO NOT REPOST ANYWHERE WITHOUT MY PERMISSION
Description:
The U.S. Army XM16E1 was essentially the same weapon as the M16 with the addition of a forward assist and corresponding notches in the bolt carrier. The M16A1 was the finalized production model in 1967 and was produced until 1982.
To address issues raised by the XM16E1's testing cycle, a closed, birdcage symmetric flash suppressor with open side slots to the top, bottom, left and right replaced the XM16E1's three-pronged flash suppressor which caught on twigs and leaves from 1967 onwards. Various other changes were made after numerous problems in the field. Cleaning kits were developed and issued while barrels with chrome-plated chambers and later fully lined bores were introduced. A small storage compartment inside the stock was introduced. The buttstock storage compartment is often used for storing a basic cleaning kit.
Replaces the Carbine Rifle.
Features:
Fully animated
Working collision data
Attachment compatible
2K textures
Comes with 20 round mag and 30 round mag.
Please note:
The iron sights line up perfectly but scopes are not usable.
Animations work flawlessly.
Installation:
Just extract the archive and place the files in
mods/update/x64/dlcpacks/patchday8ng/dlc.rpf/x64/models/cdimages/weapons.rpf
Først Lastet opp: 11. juni 2022
Sist Oppdatert: 11. juni 2022
Last Downloaded: 8 hours ago
9 Kommentarer
More mods by Equinox407:
Full credit goes to Katka for the original mod on steam. I simply ported this mod to GTA V. This model is from Rising Storm 2: Vietnam, I take no credit for creating the model or textures.
DO NOT REPOST ANYWHERE WITHOUT MY PERMISSION
Description:
The U.S. Army XM16E1 was essentially the same weapon as the M16 with the addition of a forward assist and corresponding notches in the bolt carrier. The M16A1 was the finalized production model in 1967 and was produced until 1982.
To address issues raised by the XM16E1's testing cycle, a closed, birdcage symmetric flash suppressor with open side slots to the top, bottom, left and right replaced the XM16E1's three-pronged flash suppressor which caught on twigs and leaves from 1967 onwards. Various other changes were made after numerous problems in the field. Cleaning kits were developed and issued while barrels with chrome-plated chambers and later fully lined bores were introduced. A small storage compartment inside the stock was introduced. The buttstock storage compartment is often used for storing a basic cleaning kit.
Replaces the Carbine Rifle.
Features:
Fully animated
Working collision data
Attachment compatible
2K textures
Comes with 20 round mag and 30 round mag.
Please note:
The iron sights line up perfectly but scopes are not usable.
Animations work flawlessly.
Installation:
Just extract the archive and place the files in
mods/update/x64/dlcpacks/patchday8ng/dlc.rpf/x64/models/cdimages/weapons.rpf
DO NOT REPOST ANYWHERE WITHOUT MY PERMISSION
Description:
The U.S. Army XM16E1 was essentially the same weapon as the M16 with the addition of a forward assist and corresponding notches in the bolt carrier. The M16A1 was the finalized production model in 1967 and was produced until 1982.
To address issues raised by the XM16E1's testing cycle, a closed, birdcage symmetric flash suppressor with open side slots to the top, bottom, left and right replaced the XM16E1's three-pronged flash suppressor which caught on twigs and leaves from 1967 onwards. Various other changes were made after numerous problems in the field. Cleaning kits were developed and issued while barrels with chrome-plated chambers and later fully lined bores were introduced. A small storage compartment inside the stock was introduced. The buttstock storage compartment is often used for storing a basic cleaning kit.
Replaces the Carbine Rifle.
Features:
Fully animated
Working collision data
Attachment compatible
2K textures
Comes with 20 round mag and 30 round mag.
Please note:
The iron sights line up perfectly but scopes are not usable.
Animations work flawlessly.
Installation:
Just extract the archive and place the files in
mods/update/x64/dlcpacks/patchday8ng/dlc.rpf/x64/models/cdimages/weapons.rpf
Først Lastet opp: 11. juni 2022
Sist Oppdatert: 11. juni 2022
Last Downloaded: 8 hours ago
5mods on Discord
This file has been approved automatically. If you think this file should not be here for any reason please report it.
Love to see the m16a1's forgotten prototype on here, I am exited to see the arrival of the xm117 later on. You are truly a legend in this community
@ToXiC BoLTz Thank you! Only got one more model to go before I start on the CAR-15 variants.
https://steamcommunity.com/sharedfiles/filedetails/?id=2819197003 can we see this one next?
@MylesTheBroom Possibly...
oh boy
@Equinox407 Could you do the Magpul PDR for the Assault SMG at some point?
@Mangokillen Always wanted to do that one.
@Equinox407 Here are some more weapon mod ideas.
SPAS-12 for Combat Shotgun
AUG-A3 for Military Rifle
G3A3 for Special Carbine
SVD Dragunov for Marksman Rifle
I know you did the FN FAL for the Special Carbine but you can have different replacements for it and if you know you can make it into an addon.